- 電力測試器材
- 電纜故障測試儀
- **工具器具力學性能測試機
- 三相熱繼電器測試儀
- 氧化鋅避雷器測試儀
-
電容電感測試儀
- 互感器現場校驗儀
- 三相交直流標準源
-
發電機轉子交流阻抗測試儀
- 變壓器測試儀
- 高壓開關特性測試儀
- 絕緣油耐壓測試儀
- 高壓介質損耗測試儀
- 相位伏安表
- 數字接地電阻測試儀
- 回路電阻測試儀
- 微機繼電保護測試儀
- 高壓試驗變壓器
- 直流電阻測試儀
- 絕緣電阻測試儀
- 直流高壓發生器
- 耐壓儀
- 高壓無線核相儀
- 電氣
- 滑動變阻器
- 直流電阻電橋
- 機械
- 絕緣梯/凳
- 絕緣靴/絕緣手套
- 手表式近電報警器
- 滑線指示燈
- 絕緣操作桿
- 高壓放**
- 絕緣膠墊
- 高壓短路接地線
- 高壓驗電器
- 紅外線測溫儀
聯系人:吉先生
聯系電話:021-51097529
傳真機號:021-51714615
移動電話:13817044089STR3030A1三相標準源(中)英文版
STR3030A1 three-phase standard source structure of table source integration, digital closed-loop standard source technology, using the embedded system, big screen TFT color LCD display, CPLD chip and high precision A/D, D/A and A series of advanced devices, small volume light weight, can be widely used in electric energy metering industry, electrical laboratory, and other relevant departments, easy to carry to use on site.
產品別稱
三相標準源 三相交流功率源 三相交流信號源 三相數字標準源 智能數字標準源 多功能校準發生器 多功能信號標準源 三相多功能標準源 三相標準信號源 信號發生器 交流標準源 交流功率源 數字功率源 三相標準功率源 智能標準源 多功能校準源 多功能校準儀 三相標準測試電源
1 adopts touch screen control panel to add the mask button, display information, simple to use convenient.
2
Embedded watt-hour meter high standard power, and as a standard for
digital closed loop feedback, voltage, current, frequency, phase and
active power, reactive power, apparent power, power factor and so on
various parameters can be used as the standard.
3 With multiple
protection function: current limiting protection, power protection,
voltage protection, short circuit protection, current open power
amplifier thermal protection, and other functions.
4 three-phase
voltage current loop independent control, each phase voltage and current
output parameters can be adjusted separately.
5 Smart gear:
within the scope of the instrument allows the output, the user can set
arbitrary three-phase voltage current gear their rated voltage, current,
voltage and current of the sites, the fineness of adjustment of nominal
gear is set by the user reference, easy operation.
test voltage, current, phase, rich, easy to operation.
1.1 Output power:
voltage: 10-456 v voltage (internal gear 57.7, 100, 220, 100 v), the maximum output power 20 va.
current: 0.001-12 a (a) 24 (internal current gear 1, 2.5, 5, 10 a (20 a)), the maximum output power 20 va.
output frequency: 45-65 hz.
output phase: 0-359.99 °.
stability: 0.1 the following voltage, current, power stability is
less than 0.02%, 0.05 voltage, current, power stability is less than
0.01%.
distortion: internal gear rated output, voltage and current distortion degree is less than 0.5% (not a capacitive load).
Harmonic: 2-31, total harmonic content is not more than 40% of the fundamental wave, multiple superposition.
1.2 Accuracy of the output and display:
Accuracy of the output | 0.1 L | 0.05 L |
voltage | 0.1% | 0.05% |
current | 0.1% | 0.05% |
frequency | 0.02Hz | 0.005Hz |
phase | 0.05° | 0.02° |
The power factor | 0.1% | 0.05% |
Active power | 0.1% | 0.05% |
Reactive power | 0.2% | 0.1% |
Apparent power | 0.1% | 0.05% |
According to the project | The resolution of the | |
voltage | 6 a valid number | |
current | 6 a valid number | |
frequency | 0.001Hz | |
phase | 0.001° | |
The power factor | 0.00001 | |
Active power |
6 a valid number |
|
Reactive power |
6 a valid number |
1.3 Commonly used output control sites
Voltage test: 80%, 90%, 100%, 110%, 100%.
Current sites: 1%, 5%, 10%, 20%, 50%, 100%, 50% and 400%.
Phase sites: 0.5 L and 0.8 L, 1.0, 0.8 C and 0.8 C.
Three
phase voltage and current amplitude can be regulated respectively,
adjust fineness: 10%, 1%, 0.1%, 1%; The adjusting range is the largest
to 125%.
Three phase voltage, phase current, power factor can also be
split phase adjustment, adjust the fineness of 10 ° respectively, 1 °
and 0.1 ° and 0.01 °.
UB, UC respectively for UA phase can also regulate respectively.
Frequency of adjustment is three-phase voltage and current adjustment, adjust the fineness of 5 hz, respectively
1 Hz, 0.1 Hz, 0.1 Hz.
1.4 power supply
Single-phase AC 180-265 - v, 50/60 hz.
1.5 external size: 440 * 400 * 133 mm
1.6 Weight 18Kg。